SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes

I reflected on the experience, grateful for the opportunity to fly such an iconic turboprop airliner in X-Plane 11. The ATR 72-600 was a joy to fly, and I looked forward to many more hours in the virtual cockpit.

I settled into the cockpit of my trusty ATR 72-600, registered as ZK-MZE, and began to prepare for departure from Auckland Airport (AKL) to Rotorua Airport (ROT) in New Zealand. The weather forecast looked good, with clear skies and a gentle tailwind.

As I shut down the engines and completed the post-flight checks, I felt satisfied with the flight. The ATR 72-600 had performed flawlessly, and I had enjoyed every minute of the journey.

After about 45 minutes, I began the descent into Rotorua. I disconnected the autopilot and took manual control of the aircraft, configuring it for landing. The approach was smooth, and I touched down on Runway 15 with ease.

As I taxied to the apron, I received a message from air traffic control about a sudden change in wind direction. I quickly adjusted the aircraft's configuration to compensate for the new wind, feeling the ATR 72-600 respond eagerly to my inputs.

Atr 72600 X Plane 11 -

I reflected on the experience, grateful for the opportunity to fly such an iconic turboprop airliner in X-Plane 11. The ATR 72-600 was a joy to fly, and I looked forward to many more hours in the virtual cockpit.

I settled into the cockpit of my trusty ATR 72-600, registered as ZK-MZE, and began to prepare for departure from Auckland Airport (AKL) to Rotorua Airport (ROT) in New Zealand. The weather forecast looked good, with clear skies and a gentle tailwind.

As I shut down the engines and completed the post-flight checks, I felt satisfied with the flight. The ATR 72-600 had performed flawlessly, and I had enjoyed every minute of the journey.

After about 45 minutes, I began the descent into Rotorua. I disconnected the autopilot and took manual control of the aircraft, configuring it for landing. The approach was smooth, and I touched down on Runway 15 with ease.

As I taxied to the apron, I received a message from air traffic control about a sudden change in wind direction. I quickly adjusted the aircraft's configuration to compensate for the new wind, feeling the ATR 72-600 respond eagerly to my inputs.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.